Filter
Top Products
43045-01 10/15/2009
9
B10
Install the wiring and the strain relief into the wiring access
hole you made earlier.
B11
Connect 6” duct and vent to the outside. Use duct tape to
secure joints. If ducting does not fit securely, an adapter
may need to be purchased.
Vaya a la
sección E –
Instalación Final
en la página 14.
11”
9 5⁄8”
C1
Remove an existing fan and check to make sure the opening
is large enough to accommodate the new fan housing. The
opening needs to be 11” x 9 5/8”.
Section C - Existing Construction – accessible from above
NO EXISTING FAN
OR