Filter
Top Products
43045-01 10/15/2009
11
C7
Insert mounting screws, leaving space between the screw
head and the joist. (Screws are supplied.)
Attach the rails onto the screws.
C8
C9
Tighten screws.
3”
C10
Run the power supply wire through the strain relief, leaving
3” between the end of the wire and the strain relief. Tighten
the strain relief around the wire.
C11
Install the wiring and the strain relief into the wiring access
hole you made earlier.
Connect 6” duct and vent to the outside. Use duct tape to
secure joints. If ducting does not fit securely, an adapter
may need to be purchased.
C12