Filter
Top Products
43045-01 10/15/2009
14
E2
E3
Connect fan wiring harness. DO NOT ALLOW THE FAN TO
HANG FROM THE WIRING HARNESS. INSTALLATION IS
EASIER IF TWO PEOPLE ARE INVOLVED.
Install the wiring cover box. Make sure all wiring connec-
tions are inside the wiring cover box.
Section E - Final Installation
NOTE: Though this final installation section shows the housing mounted to a joist, the final installation procedure is the same
whether the housing is mounted to a joist or suspended between joists.
E4
Install the fan assembly by inserting the tabs as shown and
pushing the fan assembly into the housing. Make certain the
wiring is not pinched between the fan
assembly and the housing.
Connect the wiring as shown.
A
3 Pin
2 Pin
Fan Motor
Light
Light
Green
Black
Black
Red
Red
White
Black
Black
White
White
Bare Copper
Ground
E1
Night Light
Night Light
Switch 1 (AC In)
Main Switch 1 (AC In)
Switch 2 (AC In)
*Option Fan & Main Light Together
*Option