Filter
Top Products
25
The default for this thermostat setting is in a 12 hour format.
You can change the format to 24 hour format by pressing Day/
Time and then Program.
The AM/PM indicator will be off when the thermostat is in 24
hour mode.
Setting day and time:
1. Press
Day/Time. (AM/PM and current hour will flash)
Press
Up or Down to adjust the setting.
2. Press
Day/Time again to adjust the minute setting.
Press Up or Down to adjust the setting.
3. Press
Day/Time again to adjust the day of the week.
Press
Up or Down to adjust the setting.
4. Press
Day/Time to return to the normal display.
Press
Up or Down to adjust the setting.
You may also press Hold/Return at any time to return to the
normal display.
SETTINGS, CONT.