Filter
Top Products
Your thermostat can be programmed in two
different ways.
1. Autoprogram method
2. Manual method
Before programming, position the
Heat/Off/Cool selector to the mode to be
programmed.
Autoprogram method
In autoprogram method, you can program
your thermostat instantly for the entire week
by simply pressing “Auto Prog.” key once.
When this key is pressed, standard program
gets activated and your thermostat is
programmed automatically. The standard
program is shown in table 3.
If you wish to change this program to suit
your life style, you can do so by changing the
time and the temperatures of those programs
which you want to be different than standard
programs. The method is explained in the
manual method of programming.
Press
Your thermostat will be programmed
automatically according to Table 3
(If the slide switch is in the heat mode, only
heat program is effective. In order to activate
cool program, slide the switch to cool mode
and press “Auto Prog.”)
Manual method
In this method, each program is inserted
according to your personal programming
schedule.
When the battery is first inserted, the
thermostat is programmed for 68°F (20°C) in
heat mode and 78°F (25°C) in cool mode.
NOTE: There are no energy saving time or
temperature settings.
Familiarize yourself with manual program-
ming. The following example demonstrates
the manual programming method. You can
program or change the program of weekdays
and weekends.
Programming Your Thermostat
PROGRAM
NUMBER TIME TEMP IN F° (C°)
HEAT COOL
1 5:00AM 68 (20) 78 (25)
2 7:00AM 60 (15) 85 (29)
3 3:00PM 68 (20) 78 (25)
4 10:00PM 62 (16) 82 (27)
AUTO
PROG
TABLE 3