Hunter Fan 43168 Thermostat User Manual


  Open as PDF
of 21
 
30
31
1. INDIGLO
®
night-light - will backlight the display for easy viewing in the dark. Press any
button to illuminate the light.
2. Filterchangeindicator-willashafter400hoursofsystemuseasaremindertocheckor
changeyourlter.PressandholdtheFi l T e r buttonfor5secondsafterchangingthelterto
resettheltertimer.
(Pressing the Filter button for less than 5 seconds will cause the Filter change indicator
icontoappear.Theltertimerwillnotbeaffectedunlessthebuttonisheldformorethan5
seconds.)
5. Auto recovery – allows heating and cooling systems to gradually recover from an energy-
saving setpoint temperature to a comfort setpoint temperature. Auto recovery calculates the
time needed to adjust the temperature to the next program setting. When the thermostat is
inAutoRecoverymode,thedisplaywillashalternatingmessagesofRECOandthetime.
Auto Recovery can be disabled by sliding the recovery switch on the back of the circuit
board to the disable position.
(Auto Recovery will not operate if Permanent or Temporary holds are on.)
Press Ho l D /re T U r n during the Auto Recovery process to manually cancel the recovery.
Icons and Features
lter
HEAT TEMP
2
Fi l T e r button
 previous next