Hunter Fan 43006-01 Air Cleaner User Manual


  Open as PDF
of 26
 
43006-01
Operation
6
Air Sterilizer Maintenance
Air Sterilizer Maintenance
43006-01 7
Initial Operation
NOTE: The power cord has a three-prong grounded plug, and must be used with
an electrical outlet that can accommodate the grounding pin. DO NOT use an
adaptor if your power outlet can not accommodate the three-prong grounded
plug. DO NOT, UNDER ANY CIRCUMSTANCES, CUT OR REMOVE THE GROUND-
ING PIN FROM THIS PLUG.
1. RemovetheAirSterilizerfromitsboxandremovetheclearplasticprotectivebag.
Placetheunitonarmleveloor.
2. Make certain the Fan Speed Control Dial is in the Off position.
2. Plug the unit into a standard household electrical outlet.
3. Turn the Fan Speed Control Dial to Medium. (You can select your desired fan speed
afteryouverifyfanoperation.)TheFanshouldbeginoperatingandthePowerLED
should illuminate. Verify fan operation by placing your hand at the top/back of the unit.
Youshouldfeelairmoving.Ifthefandoesnotbeginoperating,gototheTroubleshoot-
ing section on page 12 of this manual.
Cleaning Your Air Sterilizer
NOTES:
•TheAirSterilizermustbeunpluggedduringthecleaningprocess.
•Besuretheunitiscompletelydrybeforeplugginginandusing.
•Neverimmersetheunitinwater.
Proper maintenance of your Hunter Air Sterilizer will help ensure years of trouble free
service.
Follow these steps to properly maintain your Air Sterilizer:
1. Approximatelyevery90days,theoutsideoftheunitshouldbecleanedwithasoft,
damp cloth.
2. TodeterminewhenandhowtocleanthePre-FilterandchangetheMainFilter,follow
the instructions beginning in the Pre-Filter and Main Filter Information section of this
manual (pg. 6).
Pre-Filter and Main Filter Information
Tomaintainpropersterilizationperformance,thePre-Filtershouldbecleanedevery1400
hours(approximately3monthsofuse),andtheMainFiltershouldbechangedevery8000
hours(approximately1yearofuse).Ifnecessary,thePre-Filtercanbecleanedmoreoften,
and the Main Filter can be changed more often. Proper maintenance of the Pre-Filter will
help extend the life of the Main Filter. Refer to Obtaining Replacement Filters (pg. 12) if
youneedhelpndingreplacementMainFilters.
Filter Life Counters
WhenthePre-FilterLifeCounterexceeds1400hours,thePre-FilterIndicatorwillash
amber as a reminder that you should clean the Pre-Filter. When the Main Filter Life Coun-
terexceeds8000hours,theMainFilterIndicatorwillashamberasareminderthatyou
should change the Main Filter.
Cleaning the Pre-Filter and Changing the Main Filter
To access the Pre-Filter and the Main Filter:
1. Turn off and unplug the Air Sterilizer.
2.RemovetheTopCover.PlaceyourngersundertheTopCoverTabsonthe
TopCover’sfrontcorners.SeeFigure4a.LiftthefrontoftheTopCover,then
pull it toward the front of the unit. See Figure 4b.
Pre-Filter Indicator
(Amber,ashing)
Fig.3-Pre-FilterandMainFilterIndicators,TopCoverOn
TopCoverTabs
1
2
Fig.4a-TopCoverTabs
Fig.4b-RemovingtheTopCover
Main Filter Indicator
(Amber,ashing)
 previous next