Filter
Top Products
9
42693-01 • 11/11/09 • Hunter Fan Company
Step 4-3
A • Ground/Green
Step 4-4
B • Ceiling Black
• Receiver Black: “LIVE IN”
C • Ceiling White
• Receiver White: “NEUTRAL IN”
Step 4-5
D • Fan Black/White
• Receiver Black/White: “LIGHT OUT”
E • Fan Black
• Receiver Red: “FAN OUT”
F • Receiver White: “COMMON OUT”
• Fan White
All wiring must be in accordance with national and local electrical
codes and ANSI/NFPA 70. If you are unfamiliar with wiring, use a
qualified electrician.
4-1. Make sure the power is still o.
4-2. To connect the wires, hold the bare metal leads together and place
a wire connector over them, then twist clockwise until tight. For
all these connections use the wire connectors provided.
CAUTION: Be sure no bare wire or wire strands are visible after
making connections.
4-3. Connect the ground wire from the ceiling to the green ground
wire from the ceiling plate and the green ground wire from the
downrod or low prole washer.
4-4. Using the large wire connector, connect the white wires and the
black wires from the ceiling as follows:
•
e white (common) power wire from the ceiling to the white
wire from the receiver (marked on red tag “NEUTRAL IN”)
• e black power wire from the ceiling to the black wire from
the receiver (marked on white tag “LIVE IN”)
4-5. Using the small wire connector, connect the wires from the fan as
follows:
• e black wire from the fan to the red wire from the receiver
(marked on red tag “FAN OUT”)
• e white wire from the fan to the white wire from the receiver
(marked on white tag “COMMON OUT”)
• e black/white wire from the fan to the black/white wire from
the receiver (marked on white tag “LIGHT OUT”)
4-6. Check each connection to make sure no bare wire or wire strands
are visible. Push all wires and wire connectors back through the
ceiling plate hole into the outlet box.
4-7. Run the white antenna wire from the receiver around the inside of
the canopy for clear reception.
Large Wire
Connector
Steps 4-3 – 4-7
Small Wire
Connector
Receiver
A
B
C
E
F
D
Antennae
4 • Wiring the Fan