Hunter Fan 42693-01 Fan User Manual


 
15
42693-01 • 11/11/09 • Hunter Fan Company
8 • Completing Your Installation With or Without a Bowl Light Fixture (Continued)
Installing the Glass Bowl
8-8. First install B10 candelabra bulbs (60 Watt Maximum) into the
sockets.
8-9. read the light and fan pull chains through the hole in the center
of the glass bowl. en, thread the light pull chain through the hole
in the center of the cover plate.
8-10. read the fan pull chain through the grommet hole in the side of
the cover plate.
8-11. Place the cover plate up against the glass bowl. Align the holes in
the cover plate and glass bowl.
8-12. read the light pull chain through the nial and screw the nial
onto the threaded rod end until tight.
8-13. Attach the extra pull chains (included) to the light and fan pull
chains using the plastic breakaway connector. (You may nd the
plastic breakaway connector on the
end of the extra chain.)
Breakaway
Connector
Light Bulbs
(B10
Candelabra
Base 60 Watt
Maximum)
Metal Rod
Glass Bowl
Cover Plate
Finial