Filter
Top Products
8
44064-01 • 05/06/2010
Maintenance
Replacing the UVC Bulb
3
Figure 8
Figure 9
Figure 10
Figure 7
Screws
UVC Replacement:
Your humidier is equipped with a UVC bulb to help kill germs and bacteria in the
water. This bulb needs to be replaced once a year. These instructions will assist
you with bulb replacement.
1. Turn the humidier off and unplug it from the wall outlet.
NOTE: Before replacing the UVC bulb, you must empty the water out of the
humidifer.
2. Remove the water tank from the unit and empty any water in the humidier
base.
3. Turn the humidier base over and remove the 2 screws attaching the
compartment to the bottom of the humidier. Figure 7.
NOTE: Only remove the 2 screws pictured in Figure 7.
4. Grip the tab on the bottom of the UVC compartment and pull straight out.
Figure 7 and Figure 8.
5. Remove the UVC bulb from the UVC cover by turning counterclockwise ,
Figure 9, and lifting it slightly to clear the lip on the UVC compartment. Figure
10
NOTE: When handling the new bulb, do not let it come in direct contact with
your hands. Oils from your skin can cause the bulb to fail directly, or lessen its life
expectancy. Use the bag the bulb came in to screw it into the socket on the UVC
cover.
NOTE: If the UVC cover is not installed properly the humidifer WILL NOT
OPERATE.
6. Insert the 2 screws that hold the UVC cover, and tighten securely.
7. Reassemble the unit and resume operation.
Tab