Hunter Fan 23347 Fan User Manual


  Open as PDF
of 12
 
7
42832-01•06/04/08•HunterFanCompany
All wiring must be in accordance with national and local electrical
codes and ANSI/NFPA 70. If you are unfamiliar with wiring, use a
qualified electrician.
4-1. Disconnect the power by turning off the circuit breakers to the
outlet box and associated wall switch location.
4-2.Toconnectthewires,holdthebaremetalleadstogetherandplacea
wire connector over them, then twist clockwise until tight.
CAUTION: Be sure no bare wire or wire strands are visible after
making connections.
4-3. Connect the wires as follows:
• egreenorbaregroundwirefromtheceilingtothegreenground
wire from the ceiling plate and the green ground wire from the fan
• ewhite(common)powerwirefromtheceilingtothewhitewire
from the fan
• eblackpowerwirefromtheceilingtoboththeblackwirefrom
the fan and the black/white wire from the fan
4-4. Push all wires and wire connectors back through the ceiling plate hole
into the outlet box.
Step 4-3
Wire
Connector
4 •Wiring the Fan
 previous next