Hunter Fan 23347 Fan User Manual


  Open as PDF
of 12
 
6
42832-01•06/04/08•HunterFanCompany
Step 3-2
#8-32x1”Screw
Green
GroundWire
3-1. Position the square hanger so that the green ground wire attached
to the square faces out of the large opening in the metal bracket.
3-2.Holdingthewiresoutoftheway,liftthemotorassemblyand
place the square hanger into the opening in the ceiling plate.
WARNING: Make sure the square hanger can not rotate in the
metal bracket. Failure to do so could result in the fan falling.
3-3. Install two locking screws through the holes in the side of the
metal bracket to secure the square hanger.
Step 3-1
Motor
Assembly
Square
Hanger
Step 3-3
Locking Screw
Green
GroundWire
3 • Assembling and Hanging the Fan
 previous next