Filter
Top Products
10
Hunter Fan Company 42012-01 • 03/09/05
11
42012-01 • 03/09/05 Hunter Fan Company
7 • Installing the Switch Housing
7-1. Connect the upper plug connector from the motor to the lower
plug connector in the switch housing assembly.
Note: Both plug connectors are polarized and will only t together
one way. Make sure the connectors are properly aligned before
connecting them. Incorrect connection could cause improper
operation and damage to the product.
7-2. To attach the switch housing, thread the screws through the side
holes of the mounting plate and tighten them securely.
Note: If you are installing the light xture, proceed to 8 • Installing the
Light Fixture. If you are not installing the light xture, proceed with
steps 7-3 – 7-4 to complete the installation.
7-3. read the nial with rod (from the sack parts) through the switch
housing cap and into the switch housing.
7-4. Tighten the nial.
Steps 7-1 – 7-2
Side Holes
Switch
Housing
Switch
Housing
Cap
Finial
Steps 7-3 – 7-4