Filter
Top Products
6 ELECTROGLIDE
GENERAL OPERATION
Hose Handle Attachments
If the Electroglide is attached, turn cleaner OFF before removing hose
handle from wands.
1. Press lock button, then pull toremove handle from wand.
2. Slide attachments firmly on handle as needed.
Wand Assembly Attachments
To remove wands from the Electroglide
Powerhead, lock wands in straight up
position.
1. Press easy release pedal with foot and
pull the wands straight up out of the
Electroglide Powerhead. The Electro-
glide plug and cord do not have to be
removed to use attachments on the
wands.
2. Put attachments on wands as needed.
ELECTROGLIDE ATTACHMENTS
The Electroglide is controlled by
pressing the three-position on/off
power control switch located on
the hose handle. The headlight
will operate when the Electroglide
is turned on.
The powerhead has a height
adjustment pedal for various
carpet heights. Use the low setting
for short napped carpets, and the
high setting for plush carpets.
Pile Height
Indicator
Pile Height
Pedal
Handle Release
Pedal
Wand Easy
Release Pedal
Caution: Do not attach or remove handle or wands while cleaner is
ON. This could cause sparking and damage the electrical contacts.