Filter
Top Products
Main switch operation procedure
1.Main Control Knob
Set to Low Cool,Med Cool or High Cool as desired(FAN setting operates the fan only.)
CAUTION:If the main control
knob is turned off of changed to a fan setting from a cooling operation setting.
2.Thermostat control Knob
WAIT at teast 3minutes before resetting to cooling operation.
not as desired after a reasonable period,turn the thermostat.When the thermostat control knob is set to 10moisture
Set the thermostat control knob to your desired setting(Usually 6-7 is recommended),If the room temperature is
evaporator fins so that normal cooling can be resumed.
may freeze onto the evaporator fins by turning the thermostat control knob counter clockwise,This will quickly defrost the
1.Main Control Knob
Set either Low Cooling or High Cooling and Low Heating or High Heating as desired.
CAUTION:If the main control
knob is turned off o
r changed to a fan setting from a cooling operation setting.
2.Thermostat control K nob
WAIT at teast 3minutes before resetting to cooling operation.
and 6-7 for cooling),If the room temperature is not as desired after a reasonable period,turn the thermostat.When
Set the thermostat control knob to your desired setting(Usually 4-5 is recommended setting for setting for heating
counter clockwise,This will quickly defrost the evaporator fins so that normal cooling can be resumed.
the thermostat control know is set to 10moisture may freeze onto evaporator fins by turning the thermostat control knob
(FAN setting operates the fan only.)
1.Only Cooling
2.Cooling and Heating
7