Filter
Top Products
5
Attach cleaner lid
Rotate lid latches (E) outward. With
wet/dry selector (F) toward drain
side of tank align ribs (G) on front of
tank with slots (H) on either side of
hose inlets; place lid on tank.
Rotate latches inward to lock lid in
place.
Note: For convenience in attaching
and removing the lid, finger holds
are provided.
Attach tool rack
Slide the three tabs (I) on tool rack
into slots (J) on back of cleaner lid.
(To help locate the tool rack, guide
lines have been added to tank lid.)
Snap tool rack into place.
Attach hose, wands
and cleaning tool
Push hose into hose inlet on tank;
twist hose to tighten or loosen
connection. (See “How to use”
section for proper inlet selection.)
The wands and tools attach to hose
in the same manner.
For convenience, additional tools
store on tool rack when not in use.
Press squeegee insert firmly into
wet/dry nozzle opening.
Use squeegee for wet pick-up only.
2. How to use
Attach Drain cap
Screw drain cap onto lower, front of
tank as shown.
Additional tools and accessories
that are not included with your
model, are available at additional
cost from your local Hoover
Factory Service Center, Authorized
Hoover Warranty Dealer, by using
the enclosed order form or through
The Hoover Company online at
www.hoovercompany.com
The assembled cleaner will look like
the drawing.
Operate cleaner only at voltage
specified on data plate on cleaner
lid.
This cleaner is intended for
household use.
Cleaner Description
1. Portable blower
2. Blower latches
3. Cleaner lid
4. Hose inlets
5. Hose
6. Wet/dry selector
7. Caster supports
8. Casters
9. Tank drain cap
10. Cleaner tank
11. Wand storage holders
12. Wands: 2
1
/2-inch wands fit
over 1
1
/4-inch wands.
13. Carrying handles
14. Cleaner lid latches
15. ON/OFF switch
16. Tool storage rack
17. Cord hook: loop cord over
hook for storage.
18. 1
1
/4-inch wands
19. 1
1
/4-inch hose
20. Crevice tool
21. 1
1
/4-inch utility nozzle
22. Wet/dry nozzle
23. Squeegee insert
24. 2
1
/2-inch hose
25. 2
1
/2-inch wands
26. 2
1
/2-inch utility nozzle
27. Blower nozzle
E
E
G
F
H
J
I
1-5
1-6
1-7
2-1
1-8
1-9
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27