Filter
Top Products
Using the shampoo
polisher
1. Attach shampoo
brushes.
Do not use scrubbing-waxing-
polishing brushes on carpet or
rugs. (Shampoo brushes are very
soft to protect fine rugs and
carpet.)
2. Fill tank
Prepare shampoo solution fol-
lowing directions on container.
Fill tank according to the area be-
ing shampooed. The tank holds a
maximum of 4 quarts (3.75 liters).
Each quart (liter) of solution will
shampoo an area approximately 3
ft.
x9ft.
Umx3m).
1
liters
-2-
CAUTION: Do not use all-purpose detergents, soaps, ammonia, or
washing soda. They can cause colors to run and may damage carpet
fibers. Liquid household detergents will not give satisfactory cleaning
results. The shampoo solution should be cool or lukewarm, as a hot
solution may fade colors or cause shrinkage.
3. Shampoo carpet
Start at one end of the room and
work toward a door so that it will
not be necessary to walk on the
damp carpet. It is recommended
that an area 3 ft. x 3 ft.
(Im
x
Im)
be shampooed before moving to
another area. Start the shampoo-
polisher by lowering the handle.
Squeeze trigger intermittently to
apply the solution. Apply spar-
ingly in order not to soak the
carpet. The type of fiber, surface
texture, and height of pile will
determine how much solution
should be used. Guide shampoo-
polisher slowly, slightly overlap-
ping the strokes. Move forward
and backward until the 3 ft. x 3 ft.
area
(Im
x Im) is covered with
9