Filter
Top Products
-
.
..--
2. Attach electronic
power nozzle
Note: For most convenient use
with electronic power nozzle,
connect curved and straight
wand with cord clips to nozzle.
Attach the electronic power noz-
zle at the end of the straight wand
by fitting the button projection
on the nozzle connector into the
opening at the end of the wand.
Be sure the nozzle is locked in
place.
To release, press down on the
center of the spring latch.
Attach the curved wand to the
straight wand. Position cord into
cord clips on extension wands,
placing excess cord between
nozzle and bottom cord clip.
To attach the hose to the exten-
sion wands, rotate the plastic
latch ring on the handle to accept
the button projection on the curv-
ed wand.
Push the handle over the wand so
that the button projection fits into
the slot. Turn the latch ring to lock
wand in place.
Connect nozzle power cord to
receptacle underneath handle.
6