Filter
Top Products
The cover attaches at the front of
the nozzle. Place the notched
edge at the front of the cover into
the groove in the nozzle base.
While maintaining front connec-
tion, rotate cover over nozzle
base and pull nozzle cord through
opening in cover.
Turn nozzle over and replace
screws.
Agitator brushes
and brush roll
When to replace brushes
Disconnect cleaner from electri-
cal outlet before checking
brushes.
To check condition of brushes,
place edge of a card on the bot-
tom of nozzle base, across agita-
tor opening. Rotate agitator by
hand. If brushes do not touch
edge of card, all four brushes and
brush roll should be replaced to
maintain cleaning effectiveness.
When replacing agitator brushes
and brush roll, ask for HOOVER
part No. 48445017 and part No.
48418401.
17