Filter
Top Products
Automatic nozzle
adjustment
The power nozzle adjusts
automatically to the correct
cleaning height for all carpets
from low pile to shag. It is
suggested that you use the
power nozzle with the Suction
Regulator closed for full suction.
If the power nozzle is difficult to
push, open the Suction
Regulator.
Edge cleaning feature
This feature provides for cleaning
of carpet edges near baseboards
and solid furniture. Slots on the
nozzle bottom plate carry dust
from the carpet edge to the
nozzle.
Hard surface floor cleaning
The power nozzle can be used for cleaning hard surface floors such as
wood, linoleum, vinyl, asphalt and rubber tile, sealed cork, concrete
and terrazzo as well as carpet. You will find it particularly convenient
when cleaning rugs to adjust the power nozzle to “Bare Floor” and
continue cleaning the surrounding floor surfaces. The small front
wheels on the bottom of the power nozzle provide the proper nozzle
height for hard surface floors. The brush located directly behind the
nozzle opening helps to provide effective cleaning of hard surface
floors.
Adjust the Surface Selector with
your toe to the “Bare Floor”
setting. The Selector Indicator
should show the lever on the
“Bare Floor” position. As you
move from the rug surface and
begin to clean the floor, you will
hear an increase in sound as the
agitator brushes power sweep the
floor. If you prefer you may use
the Wall/Floor Brush to clean
hard surface floors. The power
nozzle
is
not
recommended
for
8