Filter
Top Products
.
I
I
3. Lift up front of headlight cover.
Then remove cover and lens.
5. Position headlight lens and
cover in place, aligning projection
on cover with slots on power noz-
zle at front and back of nozzle.
4. Push bulb into socket and twist
to remove. Replace with 15 watt
bulb. Push new bulb into socket
and twist into place.
6. Press top of cover to snap pro-
jections into place.
7. Turn power nozzle over and
replace cover screw.
8. Replace bottom plate by fitting
the plate over the lip at the front of
the nozzle housing. Line up the
slots over the wheels and position
holes in bottom plate over screw
mountings. Replace screws.
21