Filter
Top Products
Operate cleaner only at voltage specified on data plate on bottom of
cleaner.
WARNING: Electrical shock could occur if used outdoors or on wet
surfaces.
How to assemble
1. Connect hose
To connect hose, insert hose into
opening of cleaner lining up the
arrow on the hose with the dot
on the cleaner. Turn the hose
clockwise until it lines up with the
bar on the cleaner and latch locks
into place.
When the hose is attached
properly, the hose cord plug will
reach to the receptacle on the
cleaner.
Insert the plug firmly and as deep
into the receptacle as possible.
To disconnect hose, depress latch
away from hose connection
opening in cleaner. While holding
latch, turn the hose counterclock-
wise until the arrow lines up with
dot on the cleaner.
5