Filter
Top Products
How to replace
Disconnect cleaner from electri-
cal outlet.
1. Remove bottom plate, agitator
and belt following directions for
“How to replace belt.”
2. Discard old agitator and end caps.
3. If the end caps should fall off the agitator, they are different from each
other and need to be properly oriented as shown below. End caps should
fit tightly on agitator.
END CAP WITHOUT
SIDE PROJECTIONS
FIBER WASHER
I
FIBER WASHER
0
0
“IIV,.,.,
VII
BELT
4. Position agitator in nozzle and
replace bottom plate, screws and
front cover following directions for
“How to replace belt.”
11