Filter
Top Products
6. Attach belt to motor pulley.
Replace bottom plate by first
hooking it to center tab on inside
of nozzle.
7. Reposition screws and front
cover.
8. Make sure “bridge” across
bottom plate opening covers belt.
If belt is not covered, agitator is
not correctly oriented in nozzle.
Agitator brush
Disconnect cleaner from electri-
cal outlet.
To check condition of agitator
brushes, move the edge of a card
across agitator opening. Rotate
agitator by hand. If brushes do
not touch edge of card, replace
the agitator.
Where to buy
The agitator may be purchased
from your local Authorized Hoover
Dealer or from a Hoover Factory
Service Center.
Ask for HOOVER agitator complete
with end caps, part No. 59139205
10