Hoover S3237 Vacuum Cleaner User Manual


 
3. Attach tool storage rack
To attach tool storage rack, in-
sert rear projections of rack into
the two rear slots on top of the
cleaner. Snap front middle sec-
tion into place.
To remove, press front middle
section and lift rack up.
Position tools in appropriate sec-
tions on rack as indicated by
symbols.
How
to use
Two speed switch
Your cleaner is equipped with a switch for “Hi” and “Lo” speed.
Use “Lo” speed when reduced suction is desired such as when cleaning
throw rugs or when using the tools on delicate fabrics.
Use “Hi” speed for all cleaning tasks when maximum suction is desired.
Check bag indicator
With the cleaner on “Hi” speed, the Check Bag Indicator will light up
when the bag needs replaced. If powdery substances have been picked
up, the bag may need replaced even if it is not full.
Note: The bag may not need replaced if the light comes on during tool
use or if there is an obstruction in the hose, wands, or power nozzle.
,
(See Maintenance Section.)
Electronic power nozzle
Handle adjustment
The handle has two positions
when used with the electronic
power nozzle: Upright and
Operating.
To lower handle to the Operating
position, place your foot on the
grooved area (located above the
Agitator Control Pedal on the
nozzle) and push the handle
down,
I
7