Hoover S3237 Vacuum Cleaner User Manual


 
9
I
OPEN
t
Automatic nozzle
adjustment
The electronic power nozzle ad-
.justs automatically to the correct
cleaning height for all carpets from
low pile to shag. If the power
nozzle is difficult to push, or if the
“POWER GUARD” activates due
to heavy carpet load, open the
Suction Regulator.
Cleaning tools
Removing and
replacing tools
To remove tools from tool storage
rack, grasp the top of the tool, as
shown in the illustration, and lift
UP.
To replace tools, position tool in
appropriate section on the tool
storage rack and snap into place.
Select the proper cleaning tool
The cleaning tools have many uses. Select the tool best suited for the
cleaning task from the descriptions below. Adjust the Suction Regulator
to select the amount of suction appropriate to the cleaning task.
1. Crevice tool
for radiators,
dresser drawers, spaces between
kitchen appliances.
2. Wall/floor brush for walls
and very irregular hard surface
floors such as brick and slate.
3. Furniture nozzle
for uphol-
stered furniture, draperies, tapes-
tries, mattresses, clothing, auto-
mobile interiors and carpeted
stairs.
4. Dusting brush
for carved fur-
niture, table tops, books, lamps,
lighting fixtures, Venetian blinds,
baseboards, shutters and regis-
ters.
10