Filter
Top Products
How to use
To reduce the risk of electric shock, this appliance has a polarized plug
(one blade is wider than the other). This plug will fit in a polarized outlet
only one way. If the plug does not fit fully in the outlet, reverse the plug. If it
still does not fit, contact a qualified electrician to install the proper outlet.
Do not change the plug in any way.
Power nozzle
The power nozzle adjusts automatically for cleaning hard surface floors and
various heights of carpet. It is not recommended for very irregular surfaces
such as brick, slate, and certain parquet floors unless it is unplugged from
the cleaner. This will stop the agitator from rotating. If desired, the Wall/
Floor Brush (shown in Cleaning Tools section) can be used for this task.
Handle positions
The handle has two positions when
used with the power nozzle:
upright
and
operating.
To lower handle to operating
position, place your foot on the
power nozzle and push handle
back.
Edge cleaning
Brushed edge cleaning is provided
on both sides of the nozzle to
remove embedded dirt in carpet
near baseboards and furniture.
Guide side of nozzle parallel to
edge of carpet or furniture.