Filter
Top Products
How to replace
Disconnect
cleaner from electrical outlet.
1.
Remove cover by lifting top
section of carrying handle and
pulling forward.
3. Place lower notched edge of
new bag collar into grooves located
inside front of cleaner.
2. Depress latch and lift out used
bag.
4. Pull collar forward until latch
snaps into collar. Open folds of
bag. Push top of bag back.
Replace cover.
Note:
A bag that does not expand properly may restrict airflow. In this
event, check the bag, making sure all folds are open.
High suction on
some carpet surfaces can cause the nozzle to hug the carpet and also
restrict air flow. If this occurs, reduce the suction by opening the
suction regulator.
11