Hoover 41016047 Burner User Manual


 
2
UNPACKING THE APPLIANCE
Inside the appliance, you will find :
• a plastic bag containing :
- the new jets for the gas modification, if required,
- according to model, a cylindrical connector and/or a conical connector with seal
for the gas connection,
- the fixing brackets with screws required for installing the hob in the worktop.
TO GET THE BEST FROM YOUR APPLIANCE, PLEASE READ THE FOLLOWING
CAREFULLY.
Please keep the operating and installation instructions in a safe place for future reference.
Before fixing the hob, note the serial number of the appliance just in case you should
require future repairs from our after sales service organisation at some time in the future.
RECOMMENDATIONS
Unpacking the appliance ...................................................................... 2
Recommendations ........................................................................... 2-3
Hob features........................................................................................ 3
• INSTALLATION
Safety instructions ............................................................................... 4
Modification of the factory gas setting :
* Fitting of the correct jets .................................................................... 5
Fitting the hob ...................................................................................... 6
Gas connection .................................................................................... 7
Electrical connection............................................................................ 8
After final installation of the hob (if modification of the gas setting) :
Adjusting of the lower flame on the gas burners................................... 9
• USING THE APPLIANCE
The different gas burners .................................................................... 10
Igniting and setting the burner .............................................................11
The hot plate - some tips............................................................... 12-13
General maintenance .................................................................... 14-15
CONTENTS
All these characteristics are given for information with a constant concern for improving
production quality, the manufacturer may make modification to the appliance to incorporate
technical improvements.
The hobs are in conformity with directives 89/336/CEE, 73/23/CEE and
90/396/CEE.