Hoover 4080 Vacuum Cleaner User Manual


 
13. Do not vacuum up harmful or toxic
material (chlorine bleach, ammonia,
drain cleaner, etc).
14. Do not vacuum up hard or sharp
objects such as glass, nails, screws,
coins, etc.
15. Do not use without the filters in place.
16. Use extra care when vacuuming
on stairs.
17. Keep vacuuming area well lit.
18. Store the vacuum cleaner indoors in
a cool, dry area.
19. Turn off the switch before unplugging.
20. Do not immerse the vacuum cleaner
into water or other liquids.
WARNING: Always switch off and
unplug the vacuum cleaner from the
electrical outlet before assembling,
opening or emptying the dirt container,
or before connecting/disconnecting the
attachments.
CAUTION: The vacuum cleaner is a very
powerful unit. Before plugging the cord
into the outlet make sure the switch is
in the ‘off’ position. Hold the vacuum
cleaner firmly when starting.
IMPORTANT: If the inlet or hose is
blocked, switch off the vacuum cleaner
and remove the blockage(s) before
re-starting.
IMPORTANT: Cleaning filters improves
vacuum performance. Make sure all
filters are replaced and locked into
place before use.
This appliance is suitable for commercial
use. PLEASE KEEP THESE INSTRUCTIONS
FOR FURTHER USE.
Motor Thermostat
IMPORTANT: The motor is equipped
with a thermal cut-out. If for any reason,
the vacuum cleaner should over-heat,
the thermostat will automatically turn
the unit off. Should this occur, unplug
the vacuum cleaner from the electrical
outlet and turn off the switch. Remove
the dirt container and empty. Clean
the filters. Allow the cleaner to cool for
approximately one (1) hour before
re-starting.
3