Filter
Top Products
9
HEPA Pre-motor Filter
1. Turn off the vacuum cleaner and
unplug it from the electrical outlet.
2. Unclip the retainer clip on the top
of the vacuum cleaner and lift up
to gain access to the dirt container
department.
3. The HEPA pre-motor filter is found
in the centre of the dirt container.
Rotate the filter clockwise to remove.
4. Gently tap the filter against the side
of the rubbish bin to remove excess
dirt. The filter may then be rinsed in
cool water. Allow to thoroughly air
dry before replacing. Replace the
filter every 3-6 months depending
on usage or when the filter
becomes discoloured.
NOTE: Do NOT use any detergents or
boiling water to wash the filter.
5. Replace the HEPA filter back in the
machine before use.
Fig.6/3
Fig.6/4
Fig.6/5