Filter
Top Products
Set the lever at SHAG for all
long pile loosely woven car-
pets or rugs.
Use the NORMAL setting for
all carpets or rugs with a
tightly woven pile.
The INDOOR/OUTDOOR set-
ting should be used for all
floor coverings that have a
very flat surface pile. . . or
are cemented to the floor.
FIG. 3
FOR BEST RESULTS, TIP THE CLEANER BACK ON ITS
REAR WHEELS AND ADJUST THE LEVER BY
HAN&
(FIG. 2)
NOTE: When removing loose dirt from hard surface
floors, adjust the cleaner to the NORMAL position. The
INDOOR/OUTDOOR setting on the c 1 e a ne r lowers’ the
nozzle to the carpet for effective cleaning of INDOOR/
OUTDOOR carpet. However, be certain to change the rug
position when cleaning normal or shag pile carpet. If the
INDOOR/OUTDOOR setting is used when cleaning normal
or shag pile carpet, there is an increase in the belt load
and pushing effort is greatly increased.
SET THE DIAL FOR CLEANING TOOLS
The handle of the cleaner should be in Storage
POSitiOn
(see Page I) when cleaning to o I
s
are used. When the
handle is in this position,
the nozzle is raised and the
agitator does not come in contact with the rug.
Attach hose and cleaning tools (Page
6).
Set lever on Suc-
tion Control Dial to “HIGH” under “TOOL SUCTION” for
most cleaning. For cleaning draperies and delicate fabrics,
move lever toward
“
LOW’
The lever can be placed at “HIGH”, “MEDIUM”, “LOW”
or any space between these markings.
4