Filter
Top Products
- 7 -
- 7 -
* Features vary according to model
CLEANING THE FILTERS*
Washing lter and foam:
Washing pre-motor and exhaust lter:
Rotate the BLUE lter pack until the unlock
position to release it from the dust container.
The pre-motor lter should be washed every three
months.
The Carbon lter is normally maintenance free, this
component should not be washed. If a replacement
is required please contact our spares department.
The exhaust lter should be washed every month.
Press down on the latch to remove the exhaust cover
and lter.
IMPORTANT: For optimum cleaning performance, always keep
your lters clean.
!
Separate the GREY foam lter from the BLUE
lter pack using the tab provided.
Wash the GREY foam lter thoroughly.
Gently tap to release excess dust. Wash the
lter with the BLUE housing from the inside.
DO NOT USE HOT WATER OR
DETERGENTS!
Remove excess water by shaking and leave
to dry for 24 hours. Ret lters only when
completely dry.
Do not use a brush as this will damage the
lter.
Remove excess water by shaking and leave to dry for
24 hours. Ret lters only when completely dry.
Wash lters under hand warm water.
DO NOT USE HOT WATER OR DETERGENTS!
0565-5289.indd 7 28/11/2007 15:43:27