Filter
Top Products
UV100RM TRUEUV™ COIL TREATMENT SYSTEM
5 68-0297EFS—05
Fig. 7. Apply Safety Precautions/Template sticker to
outside of duct.
External Mounting
Adhere Safety Precautions/Template sticker in chosen
location. Drill 1-9/16–inch hole for bulb. Mount base using self-
tapping screws. Snap bulb into handle and twist onto base.
Fig. 8. Apply Safety Precautions/Template sticker to
chosen location.
Shield can be used to direct UV-C away from susceptible
materials such as media filters.
Fig. 9. Use shield to protect media filter.
Mount ballast in chosen location. If necessary to penetrate
barrier, drill 3/4-inch hole to run cord. Use grommet to seal hole
around cord. See Fig. 5.
Mount Indicator Window
The indicator window allows you to safely check the operation
of TrueUV. It can also indicate to you when TrueUV has been
turned off and service or maintenance can safely be
M27080
9 16
9 16
9 16
M27081
M27072