Filter
Top Products
9
Français : voir la page 17 • Español: vea la página 33
Press
MENU
.
Link wireless accessories to thermostat (optional)
4
MENU
Press ▼ to scroll down, then press
INSTALLER
OPTIONS
. Enter security code when prompted.
Security code is the thermostat date code
(printed on back of wallplate). Or press
MENU
>
EQUIPMENT STATUS
to find code.
Installer Options
Press ▼ to scroll down, then press
WIRELESS
DEVICE MANAGER
.
Wireless Device
Manager
Press
ADD DEVICE
to start timer, then press
buttons on wireless accessories to link
them to the thermostat (see next page).
Add Device
Timer will re-set to 15 minutes after each
accessory is linked. Thermostat will exit
link mode after 15 minutes if there is no
activity.
Press
VIEW CONNECTED DEVICES
to verify that all
wireless accessories have been linked to
the thermostat
Press
DONE
when finished.
Note: If you are installing more than one thermostat, repeat steps above and on page 10
for each thermostat.
If you are installing multiple thermostats, you must press
DONE to exit “Add Device” mode
at each thermostat before
linking wireless accessories to the next thermostat.
View Connected Devices