Special Functions
18
homexpert
tm
by Honeywell THR872CUK Wireless Programmable Thermostat
19
Temporary schedule overrides — Holiday
The Holiday feature maintains a constant energy-saving temperature
while you are away for an extended time (up to 99 days).
1 Press the HOLIDAY button.
2 Press + or - to select the number of days you will be away (up to
99 days), then press OK to save.
3 Press the p or q buttons to set the temperature during your
absence, then press OK to save and exit.
To cancel the Holiday mode at any time, press the HOLIDAY button
again.
10.0
°
10.0
°
10.0
°
MON 27/12/10
SUN 09/01/11
SUN 09/01/11
RETURN DATE OK?
RETURN DATE OK?
TEMP OK?
DAYS
DAYS
DAYS
Set number of days, then press OK
NOTE: This feature works only when the thermostat is in Auto or
Manual mode (see page 11).
1
14
14
Set temperature, then press OK
• Optimum Start: This is an energy-efficient feature that adjusts the start time of your heating system. For
example, on cold days your heating system will start earlier to ensure that your home is warm when you
wake in the morning. On warmer days, heating will begin later to save energy costs. (See page 29 to turn
on this feature.)
• Summer/winter time change: The thermostat automatically changes the clock time to correspond with
changes to and from daylight savings time. (See page 28 to turn off this feature.)
• Temperature offset: In some cases, the thermostat must be installed in a location that does not
accurately control temperature for optimum comfort in other rooms. You can set the thermostat to
compensate for this by adjusting the offset (see page 29).
• Proportional band width: If your heating system is oversized for your home, you can compensate by
increasing the width of the control proportional band up to 3°C (see page 29).
• Cycle rate and minimum boiler on/off time: Adjusting these features can help your climate control
system work more efficiently for increased comfort and economy. See page 31 to find recommended
settings for your system.
Advanced features