Filter
Top Products
T8000C, T8001C AND T8024D PROGRAMMABLE THERMOSTATS
68-0195–2
2
ORDERING INFORMATION
When purchasing replacement and modernization products from your TRADELINE® wholesaler or distributor, refer to the
TRADELINE® Catalog or price sheets for complete ordering number.
If you have additional questions, need further information, or would like to comment on our products or services, please write or
phone:
1. Your local Home and Building Control Sales Office (check white pages of your phone directory).
2. Home and Building Control Customer Relations
Honeywell, 1885 Douglas Drive North, MN10-1461
Golden Valley, Minnesota 55422-4386 1-800-468-1502
In Canada—Honeywell Limited/Honeywell Limitée, 35 Dynamic Drive, Scarborough, Ontario M1V 4Z9.
International Sales and Service Offices in all principal cities of the world. Manufacturing in Australia, Canada, Finland, France,
Germany, Japan, Mexico, Netherlands, Spain, Taiwan, United Kingdom, U.S.A.
SPECIFICATIONS
IMPORTANT
The specifications given in this publication do not
include normal manufacturing tolerances; therefore,
an individual unit might not exactly match the listed
specifications. Also, this product is tested and
calibrated under closely controlled conditions, and
some minor differences in performance can be
expected if those conditions are changed.
The TRADELINE¤ models include a thermostat, wallplate
and owner s guide. A 7 3/8 in. x 5 3/4 in. (188 mm x 146 mm)
decorator cover plate (for covering wall marks) is available
separately. Order Honeywell part no. 209649A (taupe) or part
no. 209649B (white).
Power: 24 Vac nominal, 18 to 30 Vac, 50 or 60 Hz.
Electrical Ratings:
T8000C:
Heating: .02-1.2A run; 3.5A inrush.
Cooling: .02-1.2A run; 6.0A inrush.
T8001C and T8024D:
Heating: .02 to 1.5A run; 3.5A inrush.
Cooling: .02 to 1.5A run; 7.5A inrush.
T8000C, T8001C and T8024D:
Fan: .02 to 0.5A run; 2.5A inrush.
Current Draw:
T8000C Power Stealing Thermostat requires only 2.5 mA
current draw when the thermostat calls for heat and is
compatible with most 24V microprocessor systems. For
further detail, see Power Stealing in the OPERATION section.
Temperature Adjustment:
Setpoint temperature is adjusted by using the ▼ or ▲ keys.
One press changes the setpoint one degree; pressing and
holding changes the setpoint several degrees.
Temperature Setting Range: 30 to 99°F (4 to 37°C).
Ambient Temperature Range: 30 to 110°F (4 to 43°C).
Shipping Temperature Range: -20 to 120°F (-29 to 49°C).
Operating Relative Humidity: 5% to 90% RH, non-
condensing.
Cycle Rates (at 50% Load):
Heating: Selectable at 1, 3, 6, 9 or 12 cph. See Heating
Cycle Rates, Table 1, for cycle rate options and
corresponding system equipment.
Cooling: Fixed at 3 cph.
Finish:
T8000C and T8024D TRADELINE¤ MODELS: are
available in Premier White¤ and Taupe finish.
T8001C MODELS: are available in Premier White¤ color.
Accessory:
Decorator cover plates; for covering wall marks are available
separately. Order Honeywell part no. 209649A for Taupe, or
part no. 209649B for White. 7-3/8 in. (188 mm) x 5-3/4 in.
(146 mm).
Dimensions: See Fig. 1.
Fig. 1. T8000/T8001 Thermostat dimensions in in. (mm).
M14675
FAN SYSTEM
Auto On
Cool Off Heat
5-1/2 (140)
1-3/16
(55)
3-1/2
(89)
2-3/8
(70)
THERMOSTAT
4-3/8 (111)
WALLPLATE
THERMOSTAT
AND WALLPLATE
3-5/16 (84)
Hold Select
T
U
E
PM