Filter
Top Products
9 63-2652—01
7. Repeat steps 2 through 6 for all the days
desired.
8. Press Run Schedule.
Clearing Program Start
Times
1. Press Occupied or Not Occupied until the
start period to be cleared is displayed.
2. Press Day until desired day is displayed.
3. Press Clear Start Time.
4. Repeat steps 1 through 3 for all the start
times to be cleared.
5. Press Run Schedule.
Temperature Setpoints
Setpoint Limits
The setpoint temperature range is 40 to 90 °F
(4 to 32 °C) for heating and 45 to 99 °F (7 to
37 °C) for cooling.
NOTE: These limits may be restricted by the
installer to comply with local energy
codes.
Programming Temperature
Setpoints
1. Press Occupied Heat.
2. Press up S or down T until the desired
temperature is displayed.
3. Press Occupied Cool.
4. Press up S or down T until the desired
temperature is displayed.
63-2652_A.fm Page 9 Monday, May 10, 2010 4:21 PM