Honeywell programmable thermostat Heat Pump User Manual


 
63-2652—01 10
5. Press Not Occupied Heat.
6. Press up S or down T until the desired
temperature is displayed.
7. Press Not Occupied Cool.
8. Press up S or down T until the desired
temperature is displayed.
9. Press Run Schedule.
Temperature Setpoint
Overrides
IMPORTANT
Setup determines Occupied override
duration.
Default duration is three hours.
NOTE: To cancel Override and immediately
return to the program, press Run
Schedule.
TR23 Setpoint Knob
A TR23 setpoint knob can remotely adjust the
T7350 setpoint. This adjustment can be made
when the sensor is in override.
NOTES:
During override, only occupied and
standby heat setpoints, and cool
setpoints are adjusted.
The maximum adjustment is ±5 °F
(±3 °C).
With a disconnected or failed TR23
or a T7350 set for local tempera-
ture sensing, offset is zero.
63-2652_A.fm Page 10 Monday, May 10, 2010 4:21 PM