Filter
Top Products
MicroDock II
Quick Reference Guide
2
Display Elements Pushbuttons
Item Function
AC power
Batteries fully charged
Batteries half-charged
Batteries at low level
MultiMediaCard (MMC)
MultiMediaCard (MMC) not inserted
Test pass and option enabled
Test fail and option disabled
Cursor and sensor disabled
Scroll up
Scroll down
Selection arrow
Selected to be modified
Passcode protected
Pushbutton Description
C
BUMP CHECK
To bump test a detector, press C
BUMP CHECK.
When connecting a new docking
module, press and hold
C BUMP CHECK to send a
confirmation signal back to the
base station.
C
CALIBRATION
To calibrate a detector, press
C CALIBRATION (all models
excluding GasAlertClip Extreme).
C
DATA TRANSFER
To transfer datalog information
from a detector, press C DATA
TRANSFER
. (GasAlert
Extreme, GasAlertMicroClip, and
GasAlertMax XT only).
The Automatic Datalog Down-
load option is available for the
GasAlertMicroClip and GasAlert-
Max XT docking modules only.
For more information, refer to
Data Transfer (GasAlert
Extreme, GasAlertMicroClip,
GasAlertMax XT only).