Filter
Top Products
– 9 –
QUICK VIEW OF SYSTEM FUNCTIONS
QUICK VIEW OF SYSTEM FUNCTIONSQUICK VIEW OF SYSTEM FUNCTIONS
QUICK VIEW OF SYSTEM FUNCTIONS
NOTE: = Boxes represent the entering of your 4-digit user code.
SECURITY FUNCTIONS
Checking system status: --------------- STATUS
To arm in STAY mode: ----------------
*
+ STAY
To restart exit delay: -------------------
*
+ STAY OR STAY (only if programmed and
system armed in Stay mode)
To arm in AWAY mode: ---------------
*
+ AWAY
To arm with NO DELAY: -------------
*
+ AWAY or STAY + NO DELAY
To arm if Quick Arm is active: ----- AWAY or STAY (hold down for at least 2 seconds)
To disarm system and silence alarms: + OFF
To bypass a zone(s): --------------------- + BYPASS + 2-digit zone number(s)
To turn Chime mode on or off: ----- FUNCTION + CHIME
*
Security code is not required if Quick Arm is active. Instead, press and hold down the
STAY or AWAY key.
MESSAGE CENTER
To record a message: ------------------- FUNCTION + RECORD
To stop recording before end of 85 secs: OFF
To play back a message: --------------- FUNCTION + PLAY
To skip a message:---------------------------- [✻]
To delete all messages: -------------------- FUNCTION + DELETE (during message replay)
VOLUME ADJUSTMENT
To adjust message playback/announcement volume: FUNCTION + VOLUME + [3] or [6]
To mute system announcements: - FUNCTION + VOLUME + OFF
To restore/unmute announcements: FUNCTION + VOLUME + [3] or [6]
SPEAKER PHONE OPERATION
To enter speaker phone mode: ----- [#] + AUX
To exit speaker phone mode: ------- OFF
To enable/disable (toggle) ringer: [#] + VOLUME + AUX
To return keypad to telephone mode (after clearing an alarm or trouble or disarming the system): [#] + AUX
To flash (switch between two calls using call waiting): AUX *
*To return to first call wait at least two (2) seconds and enter AUX again.