Honeywell LYNXR-I Home Security System User Manual


 
– 48 –
Summary Of Audible Notification
Summary Of Audible NotificationSummary Of Audible Notification
Summary Of Audible Notification
Additional Announcements:
Pressing STATUS key once will announce the following primary messages, depending on
the system’s status at the time:
Disarmed–Ready to Arm [check system]
Disarmed [not ready to arm]
Armed [away] [stay] [instant] [check system] [exit now]
Pressing the STATUS key twice will announce the following secondary messages, depending
on the system’s status at the time:
Fire Alarm + zone voice descriptor Fault + zone voice descriptor Zones Bypassed
Alarm + zone voice descriptor Low Battery + zone voice descriptor System Low Battery
Fire Fault + zone voice descriptor Chime AC Loss
NOTE: If there are no secondary messages, the primary status messages will be announced.
LED Meanings
ARMED LED: ON = System armed
(Red) OFF = System disarmed
Blinking = System armed, but a fault exists or once per second when AVM (VOX or Talk) or
speaker phone mode is active.
READY LED: ON = System disarmed, ready to arm
(Green) Blinking = System disarmed, not ready to arm (a fault exists) or once per second when AVM (VOX
or Talk) or speakerphone mode is active.
NOTE: When the system is armed, the READY LED turns off.