Filter
Top Products
4
Wireless Keyfobs
Keyfobs are portable controllers that can be attached to a key ring. They will allow you to Set
and Unset the system by a single press of a button and can sometimes be programmed with
additional functions. Because they operate by radio, they can be used anywhere around the
premises provided that they are within range of the installed radio receiver.
NOTE: Labels are provided to place over the buttons to indicate the function.
Setting the System — Full Set
To set the system, make sure all doors are closed and windows are secure. The system cannot
be set if there has previously been an alarm which has not been reset.
To set the entire system:
Keypad:
Type your PIN
code
then press [A]
Prox Tag:
Hold the tag in front
of the prox symbol for
three seconds
The exit timer will begin and there will be a constant tone. Leave by the agreed exit route and
close the door. When the exit timer expires, there will be a five-second settling period and then
two beeps will confirm the completion of setting.
FULL SET 060FULL SET 060
FULL SET 060FULL SET 060
FULL SET 060
SOS
SOS
Begin Full
Set Procedure
(Button 1)
Begin Part
Set Procedure
(Button 3)
Unset/Cancel
(Button 2)
Begin Night
Set Procedure
(Button 4)
5804 Keyfob KTC805 Keyfob
5804 Keyfob:
Press the ON button
on the keyfob.
(Full setting will
commence as per
keypad procedure)
KTC805 Keyfob:
Press button 1 on the
keyfob. (Full setting
will commence as per
keypad procedure)