Filter
Top Products
69-1532—2 16
❑ Press or until the display shows the desired temperature setpoint.
❑ Press , or and repeat these steps for each program period. The First Day is now
programmed.
❑ Repeat each step in Program the First Day for the rest of the week.
NOTE: After the first day is programmed, you can copy that day to any other day using procedure in Copy a Day.
❑ Press when the entire week is programmed.
Copy a Day
Your thermostat can copy program settings from one day to another.
❑ Press , , or to enter programming mode.
❑ Press until the display shows the day you want to copy.
❑ Press .
❑ Press until the display shows the day you want to copy to.
❑ Press to accept the change.
❑ Repeat these steps for each day you want to copy.
NOTE: donE appears for two seconds and then the normal program display appears.
Leave
Return
Sleep
Run
Program
Wake
Leave
Return
Sleep
Day
M13327
Mon
Copy
M13328
Mon
Wed
Day
M1332
9
Copy