Honeywell 70e Window User Manual


 
Turning Power On/Off
To turn the terminal On, press and release the Power button .
To turn the terminal Off:
1. Press and hold the Power button for approximately 4 seconds until
the options menu displays.
2. Touch Power off.
Suspend Mode
Suspend mode automatically turns the touch screen off to save battery power
when the terminal is inactive for a programmed period of time. The automatic
timeout limits are adjustable from the Advance tab located under Settings >
System > Power.
Press and release the Power button to toggle the terminal in or out of
Suspend Mode.
Note: You should always place the terminal into Suspend mode before removing
the battery.
Removing the Battery
1. Place the terminal in Suspend mode.
2. Perform the steps illustrated below to remove the battery.
1
2
5
4
3
6