Filter
Top Products
109
Adsorber Protection
Particulate contamination must be considered
when utilizing gas/vapor phase adsorbers. As a
minimum, a Flanders prefilter with an efficiency of
25-30% per ASHRAE Std. 52.1 should be installed
on the upstream side of the Superflow-VC adsorber
in order to extend the service life by significantly
reducing dirt build-up. Even higher efficiency pre-
filtration should be considered when system design
allows for additional space and static pressure.
Packaging
Each Superflow-VC Adsorber is individually sealed
in a polyethylene bag prior to placement in a heavy
duty shipping carton. The bag protects the adsorber
from being expended prematurely and also facili-
tates clean and easy jobsite changeouts. The spent
adsorber can be placed in the plastic bag and then
in the carton for disposal.
Disposal
Routine disposal is usually permitted if spent adsor-
bers with Superflow-VC 201 media have been used
for normal IAQ applications. Spent adsorbers filled
with impregnated carbon and those used in indus-
trial applications may need special handling. Local
environmental authorities should be consulted prior
to disposal.
Physical Data:
Top and bottom end plates: High strength ABS
plastic
Vertical Struts: Aerodynamically designed
extruded aluminum
Vertical Supports: Steel rods on the
downstream side
Carbon Panels: Eight 1” (25 mm) moisture-
resistant corrugated kraft honeycomb grids filled
with granular carbon media contained by fine
mesh nylon screen
Panel Sealant: Non-volatile type, applied along
the entire panel periphery
Activated Carbon Media: Virgin coconut shell
base, 4 x 8 US mesh size, minimum 60% CTC
activity
Flanders - Foremost in Air Filtration
Corporate Headquarters, St. Petersburg, FL
the filter and hvac store