Filter
Top Products
INSTALLATION
INSTALLATION WS-C206/WS-C208
Disconnect the
electrical power to the machine and
follow lockout / tagout procedures.
1. Locate water supply line and appropriate drains
for softener installation.
2. Install by-pass valving.
Fig. 1
3. Install high temperature prefilter if needed.
Fig. 2
4. Remove all items from shipping package.
NOTE: If installing a WS-208 install wheel kit. WS-
C206 already has wheels installed.
5. Locate brass in/out adapters, 4 O-rings, and
silicone seal lube.
Fig. 3
6. Locate connector hoses and apply 2 to 3 wraps
of Teflon tape to the male threads.
Fig. 4
7. Thread the brass in/out adapters tightly onto the
threaded ends of the connector hoses.
WS-C206/WS-C208 Hobart Compact Water Softener Installation Instructions - INSTALLATION
Page 3 of 10 F25311 Rev. A (0913)