Filter
Top Products
-2-
ON-OFF SWITCH
(Fig. 3)
Turn cleaner on or off by pushing downward on the
power switch
3
CORD STORAGE AND RELEASE (Fig. 4)
1. To store the cord, turn the upper cord storage hook 4
to the upward position, and wrap the cord around the
hooks.
2. To release the power cord, turn the upper cord storage
hook 4 downward, then pull off the complete cord.
3. To help secure the cord during use, fix it on the upper
cord storage hook
5
HANDLE POSITION (Fig. 5)
To change the position of the handle, first press with foot
on the handle release pedal at the rear of the cleaner, and
then lower the handle.
(A) Upright position: When the handle is in this
position the rotary brush is automatically raised
away from the floor.
(B) Normal working position: This position allows you
to raise the front of the nozzle head to clear steps.
(C) Low position: For reaching under low furniture
to raise the front of the nozzle head to clear steps.
NOTE: The handle should always be in upright
position when cleaning tools are used.
4
5
Fig.4
Fig.3
Fig.5
CV_90CY.p65 6/28/04, 3:23 PM3