Filter
Top Products
RGB ON SCREEN DISPLAY
86
USING THE RGB INPUT
NOTES:• Press SELECT to AUTO ADJUST the RGB mode.
• The other functions do not operate while AUTO ADJUST is in progress.
• Allow the Plasma TV to warm up for 20 minutes before performing AUTO ADJUST.
• Select a bright image for display while AUTO ADJUST takes place.
• If AUTO ADJUST terminates unsuccessfully, try AUTO ADJUST again. If AUTO ADJUST fails several times in
succession, try using manual adjustment to adjust Vertical Frequency, Aspect Ratio, Timing Frequency and Picture.
• Always reset AUTO ADJUST when setting new display setting or when changing to a new
external component.
V POSITION
This feature allows you to adjust the vertical position in RGB mode.
Use CURSOR PAD ̇, ̈ to adjust the vertical
position.
Press MENU button to return to previous menu item.
Press EXIT to quit.
Horizontal Clock
Vertical Position
Horizontal Position
Auto Adjust
Setup
Move
SEL
Select
Input Level
Reset
Clock Phase
Black Side Panel
0
0
0
Reset
0.7V
Off
Adjust
0
H POSITION
This feature allows you to adjust the horizontal position of the display.
Use CURSOR PAD ̇, ̈ to adjust the horizontal position.
Press the MENU button to return to previous menu item. Press
EXIT to quit.
Horizontal Clock
Vertical Position
Horizontal Position
Auto Adjust
Setup
Move
SEL
Select
Input Level
Reset
Clock Phase
Black Side Panel
0
0
0
Reset
0.7V
Off
Adjust
0
Horizontal Clock
Vertical Position
Horizontal Position
Auto Adjust
Setup
Move
SEL
Select
Input Level
Reset
Clock Phase
Black Side Panel
0
0
0
Reset
0.7V
Off
Adjust
0
HORIZONTAL POSITION, VERTICAL POSITION, HORIZONTAL CLOCK and CLOCK PHASE
for current RGB format are adjusted automatically.
AUTO ADJUST
Use CURSOR PAD ̇, ̈ cursors to highlight adjust.
Press SELECT to select AUTO ADJUST.