Filter
Top Products
61
CHANNEL MANAGER
Select Channel Manager to set your Antenna options, run Auto Channel Scan, Check Signal Meter and Set Channel
List.
NOTE: When a CableCARD is installed, Auto Channel Scan will not be available since channels will be fixed based on what was
agreed upon by you and your cable operator.
This feature will automatically store active Analog and Digital channels in Auto Channel Scan memory.
Ant A
Auto Channel Scan
Start Clear
Ant B
Auto Channel Scan
Start Clear
Move
SEL
Return
Move
SEL
Return
Chan. Manager
Set The Antenna
Auto Chan. Scan
Signal Meter
Channel List
Chan. Manager
Auto Chan. Scan
Move
SEL
Return
Chan. Manager
Set The Antenna
Auto Channel Scan
Signal Meter
Channel List
Locks
Chan. Manager
Aspect
Audio
Video
Move
SEL
Sel.
Timers
Setup
Power Swivel
This feature will select Antenna options.
Move
SEL
Select
Chan. Manager
Set The Antenna
Auto Chan. Scan
Signal Meter
Channel List
Chan. Manager
Set The Antenna
( ) Connect Cable to Ant A and
Air to Ant B
( ) Connect Cable to Ant A only
( ) Connect Air to Ant A only
Cable Source
Cable(1) Cable(2)
Move
SEL
Return
Press CURSOR PAD ̆, ̄ to highlight function, the press the SELECT button to select.
Press CURSOR PAD ̆, ̄ to highlight function, the press the SELECT button to select.
Press CURSOR PAD ̆, ̄, ̇, ̈ to highlight Ant A or Ant B.
Press CURSOR PAD ̇, ̈ to highlight the Start or Clear option.
Press the SELECT button to start Auto Channel Scan.
Chan.
Manager
Set The Antenna
Auto Channel Scan
NOTE: When a CableCARD is installed, antenna settings will be set automatically to “Connect Cable to Ant A only”.
ON-SCREEN DISPLAY